Toshiba B-SX8T, B-SX6T manual Data Length Selection, Stop Bit Length Selection

2. SYSTEM MODE

EO13-33002

2.2 Parameter Setting

2.2.4 Data Length Selection

This parameter is to choose a communication data length of the RS-232C interface.

7 bits is used when transmitting alphanumeric data only. 8 bits is used to when transmitting special characters. Be sure to match a setting with a host computer.

When “<2>PARAMETER SET” appears, press the [PAUSE] key until the following display appears.

<2>PARAMETER SET DATA LENG. 8bits

Use the [FEED] or [RESTART] key to select a desired option.

[RESTART]

[FEED]

DATA LENG. 8bits

DATA LENG. 7bits

After selecting a data length, press the [PAUSE] key.

2.2.5 Stop Bit Length Selection

This parameter is to choose a stop bit length of the RS-232C interface. Be sure to match a setting with a host computer.

When “<2>PARAMETER SET” appears, press the [PAUSE] key until the following display appears.

<2>PARAMETER SET STOP BIT 1bit

Use the [FEED] or [RESTART] key to select a desired option.

[RESTART]

[FEED]

STOP BIT 1bit

STOP BIT 2bits

After selecting a stop bit, press the [PAUSE] key.

2-21