2. SYSTEM MODE

EO13-33002

2.2 Parameter Setting

2.2.2 Character Zero Selection

This parameter is to choose the way to indicate zero between “0” and “Ø”. When “<2>PARAMETER SET” appears, press the [PAUSE] key twice.

<2>PARAMETER SET ZERO FONT 0

Use the [FEED] or [RESTART] key to select a desired option.

[RESTART]

[FEED]

ZERO FONT

0

 

 

 

 

ZERO FONT

Ø

(Without slash)

(With slash)

After selecting a character zero, press the [PAUSE] key.

NOTE: The following fonts do not support a zero with slash.

Bit Map Font: OCR-A, OCR-B, GOTHIC 725 Black, Kanji, Chinese

Outline Font: Price Font 1, Price Font 2, Price Font 3, DUTCH 801 Bold, BRUSH 738 Regular, GOTHIC 725 Black, True Type Font

2.2.3 Baud Rate Selection

This parameter is to choose a baud rate of the RS-232C interface. When the printer communicates with a host computer by serial interface, be sure to match the setting with the host.

When “<2>PARAMETER SET” appears, press the [PAUSE] key until the following display appears.

<2>PARAMETER SET SPEED 9600bps

Use the [FEED] or [RESTART] key to select a desired option.

[RESTART]

[FEED]

SPEED 115200 bps

SPEED 38400 bps

SPEED 19200 bps

SPEED 9600 bps

SPEED 4800 bps

SPEED 2400 bps

After selecting a baud rate, press the [PAUSE] key.

2-20

Page 26
Image 26
Toshiba B-SX6T manual Character Zero Selection, Baud Rate Selection, After selecting a character zero, press the Pause key