Toshiba B-SX8T Basic Specification Selection Mode, Basic File Browser, Basic Trace Selection Mode

2. SYSTEM MODE

2.8.1 Basic Specification Selection Mode

EO13-33002

2.8 BASIC Setting

This parameter is to choose whether to enable the BASIC specification function or not. When “<8>BASIC” appears, press the [PAUSE] key.

BASIC ENABLE

	[PAUSE]
		[RESTART] or [FEED]
BASIC OFF			BASIC ON

[PAUSE]

FILE MAINTENANCE

2.8.2 Basic File Browser

This parameter is to display the data files in the program file and basic file area. Using this function allows you to check the file names installed in the block.

FILE MAINTENANCE

[PAUSE]

00 TEST.BAS

[RESTART]

01TEST.DAT

[RESTART]

00TEST.BAS

[PAUSE]

BASIC TRACE

Program file is displayed.

Data file is displayed.

Data files in the BASIC file area are displayed each time the [RESTART] key is pressed.

Program file is displayed.

Basic file browser is completed by pressing the [PAUSE] key.

2.8.3 Basic Trace Selection Mode

This parameter is to choose whether to enable the Basic trace function or not.

Usually, this function is set to OFF. When this function is enabled, it will be easier to find an erroneous program as the program line number are displayed. However, the processing speed of BASIC interpreter will be slower.

BASIC TRACE

[PAUSE]

[RESTART] or [FEED]

TRACE OFF
			TRACE ON
				Trace specification selection is completed by pressing
		[PAUSE]
				the [PAUSE] key.
	EXPAND MODE

2-71