Toshiba B-SX6T, B-SX8T manual Strip Motor Torque Selection, Stabilizer Function Selection

2. SYSTEM MODE

EO13-33002

2.2 Parameter Setting

2.2.29 Strip Motor Torque Selection

This parameter is to choose a strip motor torque.

When “<2>PARAMETER SET” appears, press the [PAUSE] key until the following display appears.

<2>PARAMETER SET PEEL OFF TRQ R0

NOTE: This parameter is fixed to R0.

Press the [PAUSE] key to skip.

2.2.30 Stabilizer Function Selection

This parameter is to choose whether to use the stabilizer function. The stabilizer function reduces the sound of printing.

When “<2>PARAMETER SET” appears, press the [PAUSE] key until the following display appears.

<2>PARAMETER SET STABILIZER ON

Use the [FEED] or [RESTART] key to select a desired option.

[RESTART]

[FEED]

STABILIZER ON

STABILIZER OFF

ON: Sound of printing is reduced.

OFF: Normal printing

After selecting the stabilizer function, press the [PAUSE] key.

NOTE: The stabilizer function is available only to the thermal direct print mode.

2-34