Toshiba B-SX6T, B-SX8T manual Descriptions of the Parameters, Font

2. SYSTEM MODE

EO13-33002

(Revision Date: Mar. 26, 2009)

2.1 Self-diagnostic Test

• Descriptions of the Parameters

Item	#	Description	Specification
FEED	(11)	Print start position fine adjustment (PC), (KEY)	-50.0 mm to +50.0 mm
CUT	(12)	Cut/strip position fine adjustment (PC), (KEY)	-50.0 mm to +50.0 mm
BACK	(13)	Reverse feed amount fine adjustment (PC), (KEY)	-9.9 mm to +9.9 mm
TONE(T)	(14)	Print tone fine adjustment (Thermal transfer), (PC), (KEY)	-10 step to +10 step
TONE(D)	(15)	Print tone fine adjustment (Thermal direct), (PC), (KEY)	-10 step to +10 step
RBN(FW)	(16)	Ribbon take-up motor driving voltage fine adjustment	-15 step to +0 step
		(PC), (KEY)
RBN(BK)	(17)	Ribbon feed motor driving voltage fine adjustment (PC),	-15 step to +10 step
		(KEY)
X ADJ.	(18)	X coordinate fine adjustment	-99.9 mm to +99.9 mm
THRESHOLD<R>	(19)	Threshold manual fine adjustment for the black mark	0.0V to 4.0V
		sensor
THRESHOLD<T>	(20)	Threshold manual fine adjustment for the feed gap sensor	0.0V to 4.0V
FONT	(21)	Character code	PC-850 PC-851 PC-1252 LATIN9 PC-852
			PC-855 PC-1253 Arabic PC-857 PC-1250
			PC-1254 PC-8 PC-1251 PC-1257 PC-866
			UTF-8
		Character “0”	0: without slash
			0: with slash
SPEED	(22)	Baud rate	2400: 2400 bps	19200: 19200 bps
			4800: 4800 bps	38400: 38400 bps
			9600: 9600 bps	115200: 115200 bps
DATA LENG.	(23)	Data length	7: 7 bits
			8: 8 bits
STOP BIT	(24)	Stop bit length selection	1: 1 bit
			2: 2 bits
PARITY	(25)	Parity	NON: None
			ODD: ODD
			EVEN: EVEN
CONTROL	(26)	Flow control code	XON/XOFF: XON/XOFF
			READY/BUSY: READY/BUSY (DTR)
			XON+READ AUTO:
			XON/XOFF+READY/BUSY (DTR)
			XON/XOFF AUTO: XON/XOFF
			READY/BUSY RTS: RTS
MESSAGE	(27)	Language selection for LCD message	ENGLISH: English
			GERMAN: German
			FRENCH: French
			DUTCH: Dutch
			SPANISH: Spanish
			JAPANESE: Japanese
			ITALIAN: Italian
FORWARD WAIT	(28)	Auto forward wait	ON: Available
			OFF: Unavailable
			NOTE: The stop position fine adjustment
			value is also printed out.
HEAD UP CUT	(29)	Head up cut in cut issue mode	ON: Activated
			OFF: Not activated
RIBBON SAVE	(30)	Ribbon saving function	ON(TAG): Activated
			(When the head lever is set to
			the tag position.)
			ON(LBL): Activated
			(When the head lever is set to
			the label position.)
			OFF: Not activated
CODE	(31)	Control code selection	AUTO: Automatic selection
			ESC LF NUL: ESC LF NUL mode
			{ }: Mainframe mode
			xx xx xx: Optional code
			(The values are given in HEX.)

2- 8