Toshiba B-SX8T, B-SX6T manual Print Start Position Fine Adjustment Example

2. SYSTEM MODE

EO13-33002

2.3 Printer Parameter Fine Adjustment

2.3.1 Print Start Position Fine Adjustment

This parameter is to fine adjust a print start position after printing (= to fine adjust the feed amount to the next media’s print start position).

When “<3>ADJUST SET” appears, press the [PAUSE] key.

<3>ADJUST SET FEED ADJ. +0.0mm

Use the [FEED] or [RESTART] key to select a desired option. (Range: -50.0 mm to +50.0 mm)

[RESTART]

[FEED]

FEED ADJ.+50.0mm

FEED ADJ.+49.9mm

FEED ADJ.+0.1mm

FEED ADJ.+0.0mm

FEED ADJ.-0.1mm

FEED ADJ.-49.9mm

FEED ADJ.-50.0mm

[FEED] key: Pressing the [FEED] key one time causes a –0.1 mm change, up to –50.0 mm.

[RESTART] key: Pressing the [RESTART] key one time causes a +0.1 mm change, up to +50.0 mm.

After completing the fine adjustment, press the [PAUSE] key.

• Print Start Position Fine Adjustment (Example)

NOTE: The fine adjustment value equals to the sum of the fine adjustment values set by the PC command and this parameter.

The maximum print position fine adjustment value is +50.0 mm. When the value reached the maximum, the value remains unchanged even if the subsequent fine adjustment is performed.

2-37