Toshiba B-SX8T „ Outline of Self-diagnostic Test, „ How to Enter Self-diagnostic Test Mode

2. SYSTEM MODE

EO13-33002

2.1 Self-diagnostic Test

2.1 Self-diagnostic Test

„Outline of Self-diagnostic Test

In the Self-diagnostic test mode, the printer automatically checks and prints out the printer system information such as the sensor status or interface, and the maintenance counter. Also it performs a print head broken element check.

The Self-diagnostic test contains the following sub menus:

<1>DIAG. Vx.x

[PAUSE]

<1>DIAG. Vx.x

PRT TYPE TRANSFR

[PAUSE]

<1>DIAG. Vx.x

TYPE[S] NO CUT

[PAUSE]

<1>DIAG. Vx.x
			[PAUSE]
MAINTENANCE CONT.
	[FEED]	[RESTART]
<1>DIAG. Vx.x
				[PAUSE]
AUTO DIAGNOSTIC
	[FEED]	[RESTART]
<1>DIAG. Vx.x
			[PAUSE]
HEAD CHECK
	[FEED]
		[RESTART]

Selection of the printing mode.

Selection of the dispensing mode.

Prints out the Maintenance Counter /Parameter Settings.

Performs a Self-Diagnostic Test, and prints out the result.

Checks to see if there is any problem with the print head.

NOTE: Use the [FEED] or [RESTART] key to select a desired option.

„How to Enter Self-diagnostic Test Mode

Turn on the printer while pressing the [FEED] and [PAUSE] keys at the same time. Hold both keys until the “<1>DIAG. Vx.x” message appears in the display.

<1>DIAG. Vx.x

2- 3