Toshiba B-SX8T, B-SX6T manual Outline of Printer Parameter Fine Adjustment

2. SYSTEM MODE

EO13-33002

2.3 Printer Parameter Fine Adjustment

2.3 Printer Parameter Fine Adjustment

Outline of Printer Parameter Fine Adjustment

In the Printer Parameter Fine Adjustment mode, you can fine adjust each parameter, such as Print tone, Print start position, Threshold, etc. which are set by the PC command. This is useful when using several types of media by turns or when the print start position or cut/strip position is required to be fine adjusted.

The Printer Parameter Fine Adjustment menu contains the following.

<3>ADJUST SET

[PAUSE]

<3>ADJUST SET FEED ADJ.+10.0mm

[PAUSE]

<3>ADJUST SET CUT ADJ. +10.0mm

[PAUSE]

<3>ADJUST SET BACK ADJ. +5.0mm

[PAUSE]

<3>ADJUST SET

X ADJUST +50.0mm

[PAUSE]

<3>ADJUST SET TONE ADJ.<T> +3

[PAUSE]

<3>ADJUST SET TONE ADJ.<D> -2

[PAUSE]

<3>ADJUST SET RBN ADJ <FW> -10

[PAUSE]

<3>ADJUST SET RBN ADJ <BK> -5

[PAUSE]

<3>ADJUST SET THRESHOLD<R>1.0V

[PAUSE]

<3>ADJUST SET THRESHOLD<T>1.4V

[PAUSE]

Print Start Positino Fine Adjustment

Cut/Strip Position Fine Adjustment

Reverse Feed Amount Fine Adjustment

X Coordinate Fine Adjustment

Print Tone Fine Adjustment (Thermal Transfer)

Print Tone Fine Adjustment (Thermal Direct)

Ribbon Motor Drive Voltage Fine Adjustment (Take-up Motor)

Ribbon Motor Drive Voltage Fine Adjustment (Feed Motor)

Threshold Fine Adjustment (Black Mark Sensor)

Threshold Fine Adjustment (Feed Gap Sensor)

2-35