Toshiba B-SX8T, B-SX6T manual Thermistor Status Display, Black Mark Sensor Adjustment, 5SENSOR ADJ

2. SYSTEM MODE

EO13-33002

2.5 Sensor Adjustment

How to Enter the Sensor Adjustment Mode

While pressing the [FEED] and [PAUSE] keys at the same time, turn on the printer. Hold both keys until the “<1>DIAG. Vx.x” Message appears.

<1>DIAG. Vx.x

Press the [FEED] key 4 times. The printer is at the start of the Sensor Adjustment menu.

<5>SENSOR ADJ.

2.5.1 Thermistor Status Display

When “<5>SENSOR ADJ.” appears, press the [PAUSE] key to display the following.

<5>SENSOR ADJ. [H]20°C [A]22°C

Ambient Temperature Thermistor Status

0 to 86 °C

Print Head Thermistor Status

0 to 86 °C

Press the [PAUSE] key to show a real-time black mark sensor status.

2.5.2 Black Mark Sensor Adjustment

<5>SENSOR ADJ. [REFLECT] 3.8V

Real-time status detected by the Black Mark Sensor 0.0V to 5.0V

Follow the procedure below to store a media level voltage of the black mark sensor.

(1)Load a tag stock in the printer so that the Black Mark Sensor detects a print area (no black mark).

(2)Press and hold the [RESTART] or [FEED] key for more than 3 seconds.

<5>SENSOR ADJ. [REFLECT] 2.8V*

When storing a media level voltage is completed, “*” appears.

(3)Remove the tag stock from the printer.

(4)Press the [PAUSE] key to show a real-time Feed Gap Sensor status.

2-59