Toshiba B-SX8T, B-SX6T manual Reverse Feed Amount Fine Adjustment

2. SYSTEM MODE

EO13-33002

2.3 Printer Parameter Fine Adjustment

2.3.3 Reverse Feed Amount Fine Adjustment

This parameter is to fine adjust a reverse feed amount.

When “<3>ADJUST SET” appears, press the [PAUSE] key until the following display appears.

<3>ADJUST SET BACK ADJ. +5.0mm

Use the [FEED] or [RESTART] key to select a desired option. (Range: -9.9 mm to +9.9 mm)

[RESTART]

[FEED]

BACK ADJ.+9.9mm

BACK ADJ.+9.8mm

BACK ADJ.+0.1mm

BACK ADJ.+0.0mm

BACK ADJ.-0.1mm

BACK ADJ.-9.8mm

BACK ADJ.-9.9mm

[FEED] key: Pressing the [FEED] key one time causes a –0.1 mm change, up to –9.9 mm.

[RESTART] key: Pressing the [RESTART] key one time causes a +0.1 mm change, up to +9.9 mm.

After completing the fine adjustment, press the [PAUSE] key.

• Example of Reverse Feed Amount Fine Adjustment

When setting +3.0 mm

Compared with “+0.0mm” position, the stop position after printing is shifted forward.

When setting +0.0 mm

Feed Direction Print Start Position after a reverse feed

3mm

Feed Direction

When setting –3.0 mm

Compared with “+0.0mm” position, the stop position after printing is shifted backward.

Print Start Position after a reverse feed

3mm

Feed Direction

Print Start Position after a reverse feed

2-41