Toshiba B-SX6T, B-SX8T manual Rfid Tag Type Selection, Rfid Error Tag Detection

2. SYSTEM MODE

EO13-33002

(Revision Date: Mar. 26, 2009)

2.9 RFID Module Setting

2.9.3RFID Tag Type Selection

This parameter is to choose an RFID tag type to be used. Available tag type is different depending on the RFID module type.

When the RFID Module Type has been set to NONE

<10>RFID

TAG NONE

Use the [FEED] or [RESTART] key to select a desired option.

[RESTART]

[FEED]

TAG NONE

TAG EPC C1 Gen2

After selecting the RFID tag type to be used, press the [PAUSE] key.

NOTE: Combination of RFID module type and available tag type

Tag type	Parameter for TPCL command	RFID module type
NONE	00	B-SX708-RFID-U2-EU-R, B-SX708-RFID-CN-R
EPC C1 Gen2	24

2.9.4RFID Error Tag Detection

This parameter is to choose whether an error detection is performed or not before writing data on an RFID tag. When “ON” is selected, data is written on an RIFD only when no error is detected.

NOTE: This function is exclusively for Alien’s EPC CI Squiggle tag. Choose “OFF” usually. When “ERR CHK OFF” is displayed, press the [PAUSE] key.

<10>RFID

ERR CHK OFF

Use the [FEED] or [RESTART] key to select a desired option.

[RESTART]

[FEED]

ERR CHK OFF

ERR CHK ON

Error tag detection is not performed. A tag is read before writing data on it, but data is always written regardless of the header data of the tag.

Error tag detection is performed. (Only when the header data of the RFID data is “A5A5”, data is written on the RFID tag. This function is available only for Alien’s EPC CI Squiggle tag only.)

After selecting the RFID error tag detection function to be used, press the [PAUSE] key.

2-76