Toshiba B-SX6T, B-SX8T manual Operation Panel

1. INTRODUCTION

EO13-33002

1.2 Operation Panel

1.2 Operation Panel

The figure below illustrates the Operation Panel and key functions.

POWER LED (Green)

ERROR LED (Red)

LCD Message Display

ON LINE LED (Green)

[FEED] key

[RESTART] key

[PAUSE] key

The LCD Message Display is a 16-character x 2-line display, which shows messages in alphanumeric characters and symbols to indicate the printer’s status. .

There are three LEDs on the Operation Panel.

LED	Illuminates when…
POWER	The printer is turned on.
ON LINE	The printer is ready to print.
ERROR	The printer is in an error state.

The [FEED], [RESTART] and [PAUSE] keys function as described below.

FEED	Feeds or ejects one media.
	Adjusts media to a proper position if the media is not properly positioned by feeding
	one or two blank media before printing.
	Prints data in the image buffer on one media according to the system mode setting.
	In system mode, this key is used to select various parameters or to set a fine
	adjustment value in the negative direction (-).
RESTART	Resumes printing when the printer is in a pause state or an error state.
	Restores the same state as when the power is turned off and on again.
	In system mode, this key is used to select various parameters or to set a fine
	adjustment value in the positive direction (+).
PAUSE	Stops printing temporarily.
	Programs threshold values.
	In system mode, this key is used as an enter key.

1- 2