Toshiba B-SX6T, B-SX8T manual Darker Standard Lighter, Maximum fine adjustment value

2. SYSTEM MODE

EO13-33002

2.3 Printer Parameter Fine Adjustment

2.3.5 Print Tone Fine Adjustment (Thermal Transfer/Thermal Direct Print)

This parameter is to fine adjust the Print Tone.

When “<3>ADJUST SET” appears, press the [PAUSE] key until the following display appears.

<3>ADJUST SET TONE ADJ.<T> +0

Print Tone for thermal transfer printing

To fine adjust the print tone for thermal direct printing, press the [PAUSE] key again.

<3>ADJUST SET TONE ADJ.<D> +0

Print tone for thermal direct printing

When the LCD display shows “TONE ADJ.<T>” or “TONE ADJ.<D>”, select a desired value with the [FEED] or [RESTART] key. (Range: -10 to +10)

Thermal Transfer Print Thermal Direct Print

[RESTART]

[FEED]

TONE ADJ<T>. +10

TONE ADJ<T>. +9

TONE ADJ<T>. +0

TONE ADJ<T>. -9

TONE ADJ<T>. -10

Darker

Standard

Lighter

TONE ADJ<D>. +10

TONE ADJ<D>. +9

TONE ADJ<D>. +0

TONE ADJ<D>. -9

TONE ADJ<D>. -10

[FEED] key: Pressing the [FEED] key one time causes a –1 tone change, up to –10 tones.

[RESTART] key: Pressing the [RESTART] key one time causes a +1 tone change, up to +10 tones.

After completing the fine adjustment, press the [PAUSE] key.

NOTES: 1. The fine adjustment value equals to the sum of the fine adjustment values set by the PC command and this parameter. The maximum print tone fine adjustment value is +10. The following table shows the maximum fine adjustment value for each print speed. Even if the set value exceeds the maximum value, it will be automatically corrected to the following value.

Maximum fine adjustment value

	B-SX6T		B-SX8T
Print speed	Thermal direct	Thermal transfer	Thermal direct	Thermal transfer
3 ips	+10 step	+10 step	+10 step	+10 step
4 ips	+5 step	+5 step	+5 step	+5 step
8 ips	+2 step	+2 step	+2 step	+2 step

2.This is useful when print tone is required to be fine adjusted. e.g.) When the ribbon is changed to different type.

2-44