Toshiba B-SX8T, B-SX6T manual Program Down Load

4. PROGRAM DOWN LOAD

EO13-33002

4.3 Firmware Download

3)Click on the Search button on the above screen, and show the sub menu screen as shown below. Select a directory to be set as the default path.

4)Click on the Select button and then the OK button. The default path setting is completed. This setting will be effective when you start up Windows next time.

5)Select a device to be set as the default device, and then click on the OK button. The default device setting is completed. This setting will be effective next time you start up Windows.

NOTES: 1. When COM1 or COM2 is selected as the default drive, communications parameter will be fixed as follows; Baud rate: 115200bps, Parity: even, Data Length: 8 bits, and Stop Bit: 1 bit.

2.The default device can be set on the main menu screen, however, it will be cleared when you exit the download program.

4- 5