GL-1010 Administrator’s Guide 111
When the update is complete, the CD is ejected from the
CD-ROM drive and the controller reboots automatically.
Updating the GL-1010 with Localized Printer Drivers
The GL-1010 does not come with localized printer drivers
pre-installed. If users want to download the European drivers
from the controller, you must first install them from the e-
STUDIO GL-1010 Client CD-ROM.
1From the copier controller, press the PRINTER/NETWORK hard
key and then press the ADMIN tab.
2Enter the administrator password and press OK to display the
main Admin Menu:
CAUTION!
Be sure to remove the CD from the drive before the controller reboots.
Otherwise, the CD-ROM drive closes upon bootup and the controller
will boot from the CD, which initiates the Operating System update
process. If this happens, press the CANCEL soft button on the copier’s
LCD panel to cancel the OS Update. The controller will shut down.
Press the START button to reboot the controller and quickly remove
the e-STUDIO GL-1010 Recovery CD-ROM.