GL-1010 Administrator’s Guide 227
Job Overflow. Finish ADF
scan.
The amount of data has reached the maximum. Reduce the
amount of data by reducing the number of pages, changing
the resolution, or changing the document type to “Text” or
“Text/Photo”.
Any data scanned before this error occurred was stored. To
retrieve the stored data, press the Finish key.
Job Overflow. To continue,
repeat the operation.
The amount of data has reached the maximum. Reduce the
amount of data by reducing the number of pages, changing
the resolution, or changing the document type to “Text” or
“Text/Photo”.
Scan kit Internal Error
(SK1)
Restart the controller. If the controller is not restored, recover
the HDD. Refer to the GL-1010 Operator’s Guide (Basic). If
the controller is still not restored, contact your Toshiba
authorized dealer for support.
Scan kit Internal Error
(SK2)
Restart the controller. If the controller is not restored, recover
the HDD. Refer to the GL-1010 Operator’s Guide (Basic). If
the controller is still not restored, contact your Toshiba
authorized dealer for support.
Scan Kit Internal Error
(SK3)
Restart the controller. If the controller is not restored, recover
the HDD. Refer to the GL-1010 Operator’s Guide (Basic). If
the controller is still not restored, contact your Toshiba
authorized dealer for support.
Scan Kit Internal Error
(SK4)
If this message is displayed during Template selection, the
selected template may be disfunctional and the template
settings should be verified in TopAccess. Otherwise, restart
the controller. If the controller is not restored, recover the
HDD. Refer to the GL-1010 Operator’s Guide (Basic). If the
controller is still not restored, contact your Toshiba authorized
dealer for support.
Scan kit Internal Error
(SK5)
Restart both the controller and copier. If the controller is not
restored after restarting, recover the HDD. Refer to the GL-
1010 Operator’s Guide (Basic). If the controller is still not
restored, contact your Toshiba authorized dealer for support.
Scan Kit Internal Error
(SK6)
Scanning cannot start due to copier status. Correct copier
operation and then retry the operation.
Scan-Related LCD Messages
Message Corrective Action