GL-1010 Administrator’s Guide 23
The Apply Changes Check screen is displayed any time
controller settings change:
5If you are finished changing controller settings, press YES.
Otherwise, press NO to continue your session. Once the
controller reboots, a configuration page prints out. Verify that
the settings were changed successfully.
Enabling the NetBEUI Protocol
1From the Network Setting menu, press NETBEUI to display the
NetBEUI Setting screen:
2Enable or disable NetBEUI, as applicable for your network.
3Press OK to save the changes for the duration of the session.
NOTE:
Check the configuration
page that automatically
prints upon startup to
confirm that the changes
were applied.
NOTE:
If the GL-1010 is
implemented in a
NetBEUI-only network,
SNMP functions will not be
available for GL DocMon
or the printer drivers.