22 GL-1010 Administrator’s Guide
Configuring IPX/SPX Protocol Settings
1From the Network Setting menu, press IPX/SPX to display the
IPX/SPX Setting screen:
2If you are running a TCP/IP-only network, press DISABLE.
Otherwise, click ENABLE to ok or modify the IPX/SPX frame
type.
3Select the frame type from the options shown.
By default, the frame type is set to AUTO. With the Auto Sense
option enabled, the GL-1010 inspects network traffic in the
attempt to determine the appropriate frame type. While this
makes frame type discovery automatic, it can also cause
network congestion.
4Press OK to save the changes for the duration of the session.
NOTE:
The IPX/SPX Settings
screen shown here displays
the Ethernet NIC settings.
The screen varies slightly if
you have a Token Ring NIC
installed.