GL-1010 Administrator’s Guide 25
3Press the APPLETALK NAME field to display the touch keyboard.
Enter the AppleTalk name, which is the same as the
Microsoft Computer Name (device name). By default, the
device name is GL<MAC Address>, where MAC Address is
the media access control number of the NIC installed in the
GL-1010. For example, GL00DOC9165206. You can change
the name, up to 15 alphanumeric characters, as long as the
name is unique within your network.
4Press the DESIRED ZONE field to display the touch keyboard.
Enter the AppleTalk Zone, which is “*” by default. This
indicates the local zone, although you can change the name,
up to 15 alphanumeric characters, if you wish.
5Press OK to save the changes for the duration of the session.
The Apply Changes Check screen is displayed any time
controller settings change:
6If you are finished changing controller settings, press YES.
Otherwise, press NO to continue your session. Once the
controller reboots, a configuration page prints out. Verify that
the settings were changed successfully.
NOTE:
Check the configuration
page that automatically
prints upon start up to
confirm that the changes
were applied.