152 GL-1010 Administrator’s Guide
INSTALLING WINDOWS SOFTWARE
The basic GL-1010 client software includes the GL DocMon
print job monitoring utility and PCL and PostScript (PS) printer
drivers.
Considerations and Limitations
nThe GL DocMon utility can monitor GL-1010 devices only.
It does not support earlier versions of the controller or any
third party printer drivers.
nUsers must install an GL-1010 printer driver and map it to the
GL-1010 in order to access it using GL DocMon.
nUsers can view all jobs in the print queue, including
controller-resident jobs, but a user can delete only his jobs.
nIf GL DocMon is installed on a network that employs the
NetBEUI protocol only, SNMP functions, such as device
discovery, are not available.
Prerequisites
Make sure that the client workstation meets the following
minimum requirements:
nWindows 95
MWindows 95 OSR2
MWinSock v2.0
MNovell Client v3.1 for Windows 95/98 plus Client
Service Pack 1*
nWindows 98
MNovell Client v3.1 for Windows 95/98 plus Client
Service Pack 1*
nWindows 2000
MNovell Client 4.7 for Windows NT/2000 with Z.E.N
works starter pack*
MMicrosoft Windows 2000 Service Pack 1
nWindows Me
MNovell Client v3.3*
*.Required only if you will be running IPX-based SNMP access and Novell printing.