188 GL-1010 Administrator’s Guide
The various file folders set up in the controller are "Data
Processing Folder" for current jobs data folder. "Shared File
Folder" for "Send to File" data. "TWAIN data folder" for
"Send to TWAIN" data.
5To delete files in a specified folder, check the checkbox
adjacent the file folder or click the Checkall heading to select
all file folders and then click the Delete button.
Warning! When you select the "Data Processing" folder
containing current jobs data, the jobs log and message log are
deleted with it automatically.
6The following message will display, "Are you sure you want
to delete all data in Folder(s)". Click Yes to proceed with the
process or Cancel to cancel the procedure.
7The Reboot page is displayed and the controller will reboot.
After rebooting, the restore process will begin. This
procedure may take several minutes.
Resetting Scan Counts
1Logon as an Administrator.
2Click the Counters tab.
3Click the Scan submenu.
4The Counter page is the default display. Scan counts for each
templates group is displayed. The Total Count indicates the
number of items in the count file.
You cannot reset the Total scan counter.
5To reset the scan counter of each template's group, check the
checkbox adjacent the group or click the Checkall heading to
select all groups and then click the Reset Counter button.
Managing Scan Jobs
Deleting Pending Scan Jobs
You can delete the pending scan jobs that are in the Scan Jobs
queue before processing.
1Click the Scan link.
2The Scan Jobs page displays. To locate pending jobs, click
the Status column to list jobs by status.