16 GL-1010 Administrator’s Guide
4Press CHANGE PASSWORD to display the Change Admin
Password screen.
5Press the OLD PASSWORD field to give it focus and then use the
control panel’s numeric keypad to enter the existing
password. Press the NEW PASSWORD field to give it focus and
then use the control panel’s numeric keypad to enter a five-
digit password.
6Press the CONFIRM NEW PASSWORD field, and then re-enter the
five-digit code to ensure it is entered correctly.
7Press the OK soft key.
If the password entered does not match the number entered in
the NEW PASSWORD field, a message displays informing you
that the access code was not changed. Re-enter and confirm
the password again.
8If both the entered and confirmed passwords match, a
message displays informing you that the password was
changed successfully.
You can now use this password to log in and begin processing
Administrative commands from the LCD Touch Screen.
Modifying GL-1010 Settings
Most users will not find it necessary to manually adjust GL-1010
protocol settings; the default settings ensure a quick and easy
installation. However, you may want to customize the settings for
optimal operation in your specific network environment.