10 GL-1010 Administrator’s Guide
Gateway [blank] This property can be configured only if
TCP/IP is enabled and IP Addressing is
set to Manual. DHCP can be used to
set the Gateway address.
Subnet Mask 255.0.0.0 This property can be configured only if
TCP/IP is enabled and IP Addressing is
set to Manual. DHCP can be used to
set the Subnet Mask address.
Primary WINS [blank] DHCP can be used to set the primary
WINS address.
Secondary WINS [blank] DHCP can be used to set the
secondary WINS address.
NetBEUI Enabled All SNMP-based functions, such as
automatic device discovery, are
disabled in NetBEUI-only networks.
Microsoft Device
Name
GL<MAC Address><MAC Address> is the media access
control of the NIC installed on the GL-
1010. The Microsoft Device Name is
mandatory as it is used for both
Microsoft and Macintosh printing.
Microsoft Workgroup WORKGROUP The Microsoft Workgroup Name is
mandatory for Microsoft printing.
Additionally, it is required if you want to
update the controller software using
TopAccess.
IPX/SPX (Ethernet or
Token Ring)
Auto Sense The GL-1010 attempts to automatically
sense the IPX frame type. This
facilitates automatic device discovery.
However, if you are running a TCP/IP-
only network, you should disable IPX/
SPX to eliminate unnecessary network
traffic.
Default Controller Settings
Property Default Setting Comments