GL-1010 Administrator’s Guide 17
For example, the default Auto Sense configuration setting for the
IPX protocol. With Auto Sense enabled, the GL-1010
automatically determines the appropriate IPX frame type and
issues SAP packets over the network, which are used for device
discovery. This default setting makes device discovery immediate
and automatic, but it generates IPX packets on all networks, even
networks that only run TCP/IP.
You can change the default network configuration settings from
the LCD Touch Screen or from within the TopAccess application,
once installed. For information on adjusting Network Setting
using TopAccess, refer to the TopAccess online Help.
Accessing Network Protocol Settings
1Press the PRINTER/NETWORK hard key.
2Press the ADMIN tab. The Enter Admin Password screen is
displayed:
NOTE:
For a complete list of the
default GL-1010 Network
Configuration settings,
refer to the tableTable ,
“Default Controller
Settings,” on page 9.