GL-1010 Administrator’s Guide 153
nWindows NT 4.0 Workstation
MMicrosoft Service Pack 5
MNovell Client v4.6 for Windows NT with Z.E.N works
Starter Pack, plus Client Service Pack 1*
nIf you have a previous version of Toshiba software installed
on the workstation, the setup program detects it and opens the
Client Setup Maintenance Program. Click Remove to delete
all previously installed components. Alternately, you can use
the Windows Add/Remove Programs option, accessible from
the Windows Control Panel, to delete the old software.
nTo ensure successful installation, it is recommended that you
close all running Windows applications before installing the
new software. If you are using an old version of Toshiba
client software, this includes exiting the document
monitoring application as well.
To do so, right-click on the systray icon and then choose Exit
from the short-cut menu.
nYou will need at least 60 MB free disk space on the
destination drive, although for optimal performance you may
want to have twice that free.
Client Setup
1Insert the Toshiba e-STUDIO GL-1010 Client CD-ROM into
the CD-ROM drive. If Auto-Run is enabled, the InstallShield
Setup Wizard starts automatically.
Otherwise, choose Run from the Start menu and then locate
the Setup.exe file on the CD. Click OK to launch the setup
program.
2Follow the Setup Wizard as it leads you through the
installation steps. You will be prompted to supply the
following information:
MEnter a destination directory or accept the default loca-
tion.
MSelect which drivers and fonts you want to install.
MEnter the network path to the printer or the queue name.
MSelect a program group or accept the default.
*.Required only if you will be running IPX-based SNMP access and Novell printing.