Toshiba GL-1010 manual 202

202 GL-1010 Administrator’s Guide
Novell Environment:
MIPX/SPX Protocol
MNovell NetWare vr. 3.x,
4.x, or 5.x networking
services
MClients running on
Windows 95/98/2000/
Me or NT platform
1Is the IPX/SPX protocol
enabled? Is the correct Frame
Type selected? If you do not
know the Frame Type or
support multiple Frame Types,
select Auto.
Next
Step
↓
→Configuring IPX/
SPX Protocol
Settings on page
22.
2If applicable, did you
successfully set up queue-
based printing?
Next
Step
↓
→Network Printer
Mode on page 116
or Print Server
Mode on page
118.
3If applicable, did you
successfully set up NDPS
printing?
Next
Step
↓
→NDPS Mode on
page 121.
4Did you configure the
controller for Novell print
services using the copier front
panel or TopAccess ?
Next
Step
↓
→Network Printer
Setup on page
117, Print Server
Setup on page
119, or Setting up
the GL-1010 as an
NDPS Object on
page 124.
5Was the GL-1010 printer
driver correctly installed?
Next
Step
↓
→Installing GL-1010
Windows Printer
Drivers on page
155.
6Is the driver’s port name
correct?
Next
Step
↓
→Driver Mapped to
Wrong Port on
page 243.
7Can you see the device in
Windows Network
Neighborhood?
End →Check that the
NetBEUI protocol
is enabled. If it is,
go to Cannot Print
To GL-1010 Device
on page 234.
Resolving Network Connectivity and Printing Issues (Continued)
Network
Configuration Check... Yes No
For
Instructions,
Go To...