26 GL-1010 Administrator’s Guide
Configuring Token Ring Settings
1From the Network Setting menu, press TOKEN RING to display
the Token Ring Setting screen:
2Set the Token Ring speed: 4MB/S or 16MB/S. Alternately,
select AUTO to automatically sense and set the correct speed.
3Press OK to save the changes for the duration of the session.
The Apply Changes Check screen is displayed any time
controller settings change:
4If you are finished changing controller settings, press YES.
Otherwise, press NO to continue your session. Once the
controller reboots, a configuration page prints out. Verify that
the settings were changed successfully.
NOTE:
The Token Ring Settings
screen appears only if a
Token Ring NIC is
installed in the GL-1010.
NOTE:
Check the configuration
page that automatically
prints upon start up to
confirm that the changes
were applied.