28 GL-1010 Administrator’s Guide
4Press the WORKGROUP field to display the alphanumeric
touchpad and enter the name of the workgroup to which the
GL-1010 belongs. Maximum 15 characters.
5Press OK to save the changes for the duration of the session.
The Apply Changes Check screen is displayed any time
controller settings change:
6If you are finished changing controller settings, press YES.
Otherwise, press NO to continue your session. Once the
controller reboots, a configuration page prints out. Verify that
the settings were changed successfully.
Updating Settings
After you are finished updating network or device settings, you
need to apply the changes you made during the session. This
process updates and reboots the controller so the modifications
can take effect. If you do not apply your changes, any
modifications you have made will be lost if you press the COPY
hard key or the copier times out.