Toshiba GL-1010 - page 267

GL-1010 Administrator’s Guide 235
UNKNOWN GL-1010 NETWORK SETTINGS
Problem Description
There are several ways you can check or change the current
network settings configured for the GL-1010:
nPrint out a configuration page from the copier’s control
panel. Refer to Print Test Pages on page 45 for instructions.
nAccess the protocol and device settings from the copier’s
control panel. Refer to Modifying Device Settings on page 27.
nUse the embedded web administration utility, TopAccess, to
view current network settings. Refer to the TopAccess
HTML Help for instructions.
Jobs trapped in
Novell print queue.
5If you set up Novell print services,
can you see the print job using
PCONSOLE or NWAdmin?
Next
Step
↓
→Refer to your
Novell
PCONSOLE or
NWAdmin user
documentation
for help using
these utilities.
Different or
unreachable
network segment.
6Have you checked the GL-1010’s
gateway and subnet settings to
make sure the GL-1010 is part of
the same network Gateway as
the client from which you are
trying to print?
Next
Step
↓
→Configuring TCP/
IP Protocol
Settings on page
19.
Network Problems. 7Are other services and
communications performed over
the network behaving in the
normal and expected manner?
Next
Step
↓
→Refer to your
network
documentation
or use a network
diagnostic utility
to research a
network problem.
Cannot Print to GL-1010
Possible Cause Check Yes No
For
Instructions,
Go To...