Toshiba GL-1010 manual 24

24 GL-1010 Administrator’s Guide
The Apply Changes Check screen is displayed any time
controller settings change:
4If you are finished changes the settings, press YES. Otherwise,
press NO to continue your session. Once the controller
reboots, a configuration page prints out. Verify that the
settings were changed successfully.
Configuring AppleTalk Protocol Settings
1From the Network Setting menu, press APPLETALK to display the
AppleTalk Settings screen:
2By default, Macintosh printing is enabled. If it has been
disabled, click ENABLE to establish Macintosh print services.
NOTE:
Check the configuration
page that automatically
prints upon startup to
confirm that the changes
were applied.
NOTE:
Currently, the GL-1010
supports EtherTalk access
only; TokenTalk is not
supported.