GL-1010 Administrator’s Guide 39
5Configure the wireless networking on the Cisco card via the
ADMIN>WIRELESS SETTINGS button on the front panel. The
wireless NIC is currently in DHCP mode.
nIf the Infrastructure network type was selected, configure any
of the network protocols as needed
nIf the Ad Hoc network type was selected and the TCP/IP
protocol is to be used, select MANUAL
MSet the static IP address to 192.168.2.2, Subnet Mask to
255.255.255.0 and Default Gateway to 0.0.0.0. The con-
necting client should have a IP address of 192.168.2.x
and same Subnet Mask and workgroup as the controller
6Reboot the controller.
7Perform a test print.
Wireless Values
The following table shows the User Interface controls to
configure the wireless options from the front panel and the
TopAccess Web Administration Page.