GL-1010 Administrator’s Guide 183
You must enter a registered user name and password to send
documents to Private folders. You must enter the
administrator’s name and password to send documents to the
Department folder. You do not need to enter a user name or
password to send documents to the Public folder.
3Enter your password again in the Confirm Password field.
4Enter a new or existing folder name for the destination
subfolder (if applicable) in the Folder Name field.
5Select a document name format and enter a name (if
applicable) in the Document Name field.
6Click Next.
7Set the following parameters:
Double-side scan
Rotation
Document Type
Resolution
Exposure
Original Size
These settings represent the mode in which the scan will be
processed.
8When you have finished, click the Finish button to apply your
new settings.
9The new template details will display in the Template
Settings page. You can password protect the template or edit
it further if desired.
10 For information on Password Protecting, refer to Password
Protecting Template Attributes on page 183.
11 Click the Templates link to return to the Templates page.
Password Protecting Template Attributes
1Click the Scan tab.
2Click the Templates submenu.
3Select either the Public or private group that contains the
template to which you want to assign or change a password.If
the group is already password protected,you must input the
correct password and then click Send to proceed.