GL-1010 Administrator’s Guide 127
7Click Next. The configuration dialog that appears depends on
the printing mechanism you choose. A description of
configuration settings for each option follows. When you
finish configuring the Printer Agent, proceed to Select Drivers
on page 130.
LPR PRINTER AGENT
If you select the LPR Gateway configuration option, the
following dialog displays:
Enter the IP Address of the GL-1010 controller and then click
Finish. You will be asked to confirm your choice. Click Yes to
continue. When the update is complete, you can proceed to
the driver selection section (see page 130). Make sure to
configure the GL-1010 for LPR/LPD printing in order to
utilize this service. (Refer to LPR/LPD Printing on page 136.)
REMOTE PRINTER ON IPX
If you select the Remote Printer on IPX option, the following
dialog displays: