Configuring Your Firewall

User Guide

 

 

If you do NOT find Command Center in the Program list (rare), you will need to click the Add button. On the program dialog, enter the file name “c:\Program Files\WiLife\Command Center.exe” and click Open. Now repeat the previous step.

Finally, click on the Advanced tab and then the GENERAL button. On the General Rules Screen, scroll down to the rule “UPNP Port 1900 Block Rule.”

Click on the Modify button and change the rule from Block to Permit. Leave the rule checked and then click OK to accept the change.

You have now successfully configured Norton Firewall, but remember that you may have more than one firewall application running on your PC. You need to disable or configure each one.

Finally, you may need to exit Command Center (from the task icon) and restart for the changes to take effect.

114

Page 128
Image 128
WiLife V2.5 manual 114