![](/images/new-backgrounds/1131739/131739131x1.webp)
Setting System Options | User Guide |
|
|
b)To delete a single zone,
Clear Selected Zone button.
c)To delete all zones, click the Clear All Zones button.
d)Finally, to detect motion anywhere on the image, click the Enable Entire Image button.
Note: Remember, you can create up to 16 motion zones per camera.
Set Motion Detection Sensitivity
Setup > Recording > Motion Detection section > Sensitivity Slider.
Use the Sensitivity slider on the Setup > Recording tab to adjust the level of motion sensitivity for each camera. The setting ranges from 0 to 100 sensitive. 100 is the most sensitivity. You can adjust the sensitivity to meet your needs. A very low number will tell the camera to only detect the motion of large objects (a person or car). A high number will increase the sensitivity allowing you to capture the motion of small objects like pets or even a passing cloud.
In our graphic below, the motion detection sensitivity level is set to 50.
Schedule Recording Time
Setup > Recording > Recording section > SCHEDULE RECORDING TIME.
The Command Center allows you to schedule recording events for each camera. These events have two types: Set Continuous Recording and Turn Cameras and Recording Off.
During Continuous recording schedules, Command Center records video from the selected camera even when there is no motion. Turn Cameras and Recording Off schedules disable both Motion and Continuous recording, although you can still monitor live video.
To activate the Recording Schedule dialog, click the SCHEDULE RECORDING TIME button on the Setup > Recording tab.
See Chapter 6: Using the Scheduler for more information.
52