Reception Modes
When used as a Stand Alone fax machine, your
FAX The machine answers an incoming call and immediately goes
ninto fax receive mode.
TEL/FAX The machine answers the incoming call. If a fax signal is not detected, the WorkCentre 385 sounds a ringing tone to indicate a voice phone call. If the external phone is not lifted while the ringing tone is sounding, the machine will switch to automatic fax reception
nmode.
ANS/FAX To use the ANS/FAX mode, you have to attach an answering machine to the EXT. LINE socket on your fax machine. If the WorkCentre 385 senses a fax tone, it automatically switches to fax reception mode. However, if a fax is not sensed, the WorkCentre 385 routes the call to the answering machine, and the caller can leave a
nmessage.
TEL In TEL mode, automatic fax reception is turned off. You can receive a fax only by manually picking up the external phone to accept the call and pressing Start to receive the fax.
Determining the Reception Mode
The current reception mode is displayed in the bottom line of the LCD display window.
08:30PM | FAX |
|
|
|
|
Reception mode
If you seldom use the fax line for phone conversations, set the WorkCentre 385 to either FAX mode or TEL/FAX mode. In these modes, the WorkCentre 385 answers incoming calls and receives faxes automatically.
