Adjusting Speaker Volume
1Press the Speaker button on the front panel to adjust the speaker volume. If you cannot hear a dial tone, check the phone line connection.
2The display indicates PHONE. Press the Up or Down button repeatedly until the desired loudness setting is displayed. Loudness is set in the range from 1 through 7, with 7 representing the loudest setting.
3After choosing the desired volume level, press the Speaker button to return to the Standby mode.
Setting the Clock Mode
You can configure your machine to display time using either a 12 hour or 24 hour format.
1Press the Menu button, then press the System Data (01) button on the
2Press the Up button.
CLOCK MODE appears on the LCD display.
The display prompts you to select either a 12 hour or 24 hour Clock Mode.
3Press 1 to select a 12 hour Clock Mode or, Press 2 to select a 24 hour Clock Mode .
