7The display asks you to enter a name for the job. To assign a name to the polling job, enter the name. If a name is not desired, skip this step.
8Press the Enter button. The display asks you to enter a
9If the remote machine is secured with a poll code, you must enter the correct code, and press the Enter button.
Or
If the remote machine is not secured with a poll code, press the Enter button to accept [0000] which represents no code.
10The display prompts for the time at which the machine will call and poll the remote machine. To call the remote machine immediately, skip over this step without entering a time for polling.
Or
If a specific time for polling is desired, enter the time. If you have
configured your machine to use a | 4 |
A.M. or P.M. |
Note: If you set a time earlier than the current time, your machine calls the number at that time on the following day.
11Press the Enter button. If you did not enter a specific time for polling, the machine dials the remote machine immediately. If you entered a specific start time, the machine will call and poll the remote machine at that time.
