If an error occurred during your fax transmission, an error message appears in the display. If you receive an error message, press Stop to clear the message and try to send the document again.
For a listing of error messages and their meanings, see LCD Display Error Messages on page
Memory Transmission (Broadcasting)
With Memory Transmission, documents are stored in memory and automatically sent to one or more remote stations. Use this feature to send your documents to multiple locations.
You can store a maximum of ten fax numbers for a memory transmission.
If you need to send your fax to more than ten locations, you can increase the3 number of fax locations dialed by including a Group Dial number as one of
the ten numbers.
After sending, the documents are automatically erased from memory.
1Adjust the document guides to match the width of the document.
2Slide the document face down into the Automatic Document Feeder until it is grasped and pulled into the machine.
If necessary, adjust the resolution and contrast. For details, see Resolution on page
3Press the Menu button, then press the Memory TX button on the One- Touch keypad.
Manual Faxing |
