Xerox Pro 385 user manual Flash, Automatic Redial

Flash

Some special phone services require a switch-hook signal for proper operation. For example, if you have call waiting, you can put a call on hold and take a second call on the same line by pressing the switch-hook button. Pressing the Flash button performs the equivalent of a switch-hook operation.

1When you are on the telephone and hear the call waiting signal, press the Flash button once. The first caller is placed on hold; you are connected to the second caller.

2Press the Flash button again to return to the first caller.

CAUTION: If your telephone service does not use the switch-hook signal, do not press the Flash button during a call. Doing so could disconnect the call.

Automatic Redial

If the number you dial to send a fax is busy or there is no answer, the machine hangs up and waits for the specified retry period. It then redials the number. If, after the specified number of retry attempts (retry count) the machine fails to connect, it returns to Standby mode.

1While the machine is redialing, the LCD display shows BUSY REDIAL.

2If you want to redial the number immediately, press the Start button. To stop redialing, press the Stop button.

3

You can select the number of retries and the retry term between each redial attempt. See User Options (System Data) on page 1-47.

Other Functions 3-31