Xerox Pro 385 user manual Sound Control

6Press the Left or Right button repeatedly until you find the desired mode:

NORMAL–use with documents of average or normal contrast.

DARKEN–use with documents with low contrast or light images.

lLIGHTEN–use with documents with high contrast or dark images.

PHOTO–for obtaining maximum image quality with documents that contain pictures or photographs with shades of gray.

7Press Enter to select the desired mode. The SOUND CONTROL ? setup menu selection is displayed. Refer to the next section Sound Control, for configuration details.

8To return to Standby mode, press the Stop button.

Sound Control

You can choose an alarm tone to sound when abnormal operating conditions occur; for example, when out of paper, or if a cover is open. You can also set the machine to beep when any key is pressed.

1Press the Menu button, then press the System Setup button on the One- Touch keypad. The display indicates RINGER VOLUME ?.

2Press the Up or Down button until you find SOUND CONTROL ?.

3Press Enter. The display prompts you to turn the alarm sound ON or OFF.

4Press 1 to turn the sound ON or 2 to turn it OFF. You can also press the Right or Left button to choose ON or OFF, then press Enter to confirm.

1-36 Getting Started