Aastra Telecom 4223 manual Standby Status within a Hunt Group, L1 Ô, Menu

				Group Services
L1 Ô	In the second case:
	Press the flashing line key corresponding to pick up the call.
	Notes:
	The simplified call pick-up described above applies only
	if the call that is picked up is for the group involved, or a
	personal call for a member of the involved group.
	If several calls are ringing within the same group, the oldest
	call will be automatically selected. If several calls are ringing
	within different secondary groups, the call that is picked up
	will be automatically selected by the system.
	Your extension may also be subject to call pick-ups from
	third party sets that belong to the same group as you.
	Standby Status within a Hunt Group
	When you belong to one or several hunt groups, you may also
	manage your availability for answering calls that are directed to
	your group(s).
	This standby service enables you to temporarily withdraw from a
	hunt group. Therefore, you would only receive personal calls, or
	those that are directed to the groups from which you have not
	withdrawn.
	Once again, the system distinguishes your position in relation to
	your primary group as well as your secondary groups.
	To manage your primary group standby status:
Menu	Press the Menu key.
	The following screen is displayed when you are granted access to
	the programming of your extension.
			Programming
	disabled	enabled	disabled	disabled
	GEN_CALL	GROUP	LOCK	CALL_FWD >

GROUP Press the dynamic function key shown on the left.

í Press the “C” key to end the programming.

If your extension was initially “enabled” within your primary group

– as shown above the function key’s label, your extension will now change to Standby status.

MD Evolution – Dialog 4223 Professional 85