Services Reserved for Attendants

Menu

CALL_FWD

>>

SYSTEM

FWD NO z

CONFIRM

í

In comparison, the previously described night call forward, to which your facility switches when it transitions to night mode, only routes your facility’s general calls, but does not affect the internal users’ ability to be contacted through their DID numbers.

To program a general call forward for your facility, when your attendant position is idle, and your general calls acceptance status is active:

Press the Menu key.

You then are granted access to your position’s programming mode.

 

 

Programming

 

enabled

disabled

disabled

disabled

GEN_CALL

GROUP

LOCK

CALL_FWD >

Press the dynamic function key shown on the left.

You may program your position’s call forwarding service, and as the case may dictate, a system general call forward.

Press the Next key to display the following screen:

Call fwd

NODISTURB NREP+BUSY REMOTE_FWD SYSTEM

>

Press the dynamic function key shown on the left that corre- sponds to your system general call forward service.

Your position displays the type of call forward requested, and prompts you to enter the number for the external call forward recipient.

System call forward Number : _

BLANK CURSOR+ CONFIRM RETURN

Dial the external number for the recipient of your system general call forward.

This number may contain up to 18 digits. It should be dialled without the “0” public network access prefix, since the system will automat- ically take it into account.

Press the dynamic function key shown on the left to confirm the external number you entered.

Your position then displays a message confirming the programming of your system general call forward.

Press the C key on your position to exit the programming mode.

The system general call forward that you have just defined is effective immediately.

130

MD Evolution – Dialog 4223 Professional

 

Page 130
Image 130
Aastra Telecom 4223 manual Callfwd System, 130