Aastra Telecom 4223 manual Automatic Call-Back on No-Answer Condition

Operations for Outgoing Calls

Automatic Call-Back on No-Answer

Condition

When placing a call to an internal party whose extension is “FREE”, but your call remains unanswered, you may activate the automatic call-back on no-answer condition for the called extension.

To do so:

L1 SMITH Peter-405

FREE

DTMF VPAGING CALL_BACK FLASH >

CALL_BACK Press the dynamic function key shown on the left.

dor í Replace the handset or press the “C” key to end the call in handsfree mode.

You will be automatically called back when your called party has demonstrated his/her renewed presence, typically by placing a new call from his/her extension.

Automatic callback

REDIAL CALLERS PICKUP NAME >

Then, once you have answered this call-back, your internal called party will be automatically re-rung.

Notes:

An automatic call-back is typically valid for 15 minutes. When this timeframe expires, if your called party has not affirmed his/her presence, the service will be automatically cancelled. When you are called back, you typically have

30 seconds to answer the automatic call-back service. If you do not answer within that timeframe, the automatic call- back is automatically cancelled.

With both services, you receive visible and audible confir- mation that you have successfully registered the automatic call-back on busy or no answer condition.

Your extension may also be subject to the automatic call- back on busy or on no-answer service from third party sets.

MD Evolution – Dialog 4223 Professional 27