Aastra Telecom 4223 manual SEC. IN/OUT z Lx IN/OUT Ô, Press the C key to end this service

Group Services

SEC. IN/OUT z

í

Lx IN/OUT Ô

On the other hand, if your extension is on standby – shown by the “disabled” status above the function key’s label – it will then return to “enabled” status within your primary group.

When your extension is on standby within your primary group, its status is represented on your idle extension with an “S” displayed on the first line of the screen.

FRI 20-APR 15:28		S
4 Callers	Station 420
REDIAL	CALLERS	PICKUP	NAME	>

Your standby status within secondary groups is managed through dialling, for all of your secondary groups as a whole.

From your idle extension:

Dial the prefix for setting your extension to standby within secondary groups.

This varies from one facility to another. You may consult the guide integrated within your extension in order to find the prefix that has been defined for this purpose for your facility. See the “Programming Your Extension” section.

A confirmation that the service was accepted is provided both visually and audibly; the “Accepted Service” message is displayed on the screen, and the service acceptance tone is played.

Press the “C” key to end this service.

If your extension was active, it will now be on standby within all of your secondary groups.

On the other hand, if your extension was on standby, it will now be active within all of your secondary groups.

Notes: You may also program these standby services for your primary and secondary groups on your extension’s pro- grammable line keys, or the repertory keys on any associated satellites. In this case, activating or deactivating standby would be carried out by pressing the corresponding key. The associated LED status reflects your standby status: an LED that is lit indicates standby, and an LED that is turned off indicates that your extension is active in relation to the involved group(s).

You may also place your extension on standby within your primary group by dialling “68”. This prefix may, however, have been modified by your system administrator.

You may place your extension on standby at any time, even if you are the last active member of a group. Your status is managed completely independently from the opening and closing of traffic for a specific group, which is the sole responsibility of the hunt group supervisor (see details to follow).

86 MD Evolution – Dialog 4223 Professional