Features and Functions | 3 |
Refresh Hold
The Refresh Hold function allows you to freeze the displayed value. The bar- graph is not held and will continue to reflect the instantaneous measured value. You can use the Setup mode to enable Refresh Hold mode when you are working with fluctuating values. This function will auto trigger or update the held value with a new measured value and emit a tone as a reminder.
1Press 
to enter Refresh Hold mode. The present
value will be held and the 
symbol will appear.
2It will be ready to hold a new measured value once the variation of measured values exceeds the variation count
setting. While the multimeter is waiting for a new stable
value, the 
symbol will flash.
3The 
symbol will stop flashing once the new measured value is stable and the new value will be
updated to the display. The symbol will remain on and the multimeter will emit a tone to remind you of this.
4Press 
again to quit the Refresh Hold function.
Agilent U1251A/U1252A User’s and Service Guide | 53 |
