Dot Hill Systems II 200 FC service manual Tables, Controller Module and Battery Module LEDs

Tables

TABLE 1-1

TABLE 1-2

TABLE 2-1

TABLE 2-2

TABLE 2-3

TABLE 2-4

TABLE 2-5

TABLE 3-1

TABLE 4-1

TABLE 4-2

TABLE 4-3

TABLE 4-4

TABLE 4-5

TABLE 4-6

TABLE 5-1

TABLE 5-2

TABLE 5-3

TABLE 6-1

TABLE 6-2

TABLE 6-3

TABLE 6-4

TABLE 6-5

Comparison of SANnet II 200 FC, SATA, and SATA SE Array Features . .	. . . . . . 1–5
SANnet II 200 FC, SATA, and SATA SE Array Configuration Options . . . .	. . . . . . 1–7
Environmental Specifications	. . . . . . 2–3
Power Specifications	. . . . . . 2–4
Physical Specifications	. . . . . . 2–4
Site Preparation Worksheet	. . . . . . 2–7
Host and Fabric Switch Connectivity Summarized	. . . . . . 2–8
Contents of SANnet II 200 Array Packages	. . . . . . 3–2
DC Cable Wiring for Cable 35-00000148	. . . . . 4–10
DC Cable Wiring for Cable 35-00000156	. . . . . 4–10
ID Switch Settings for Expansion Units	. . . . . 4–15
Sample Array and Expansion Units With Different Loop IDs and Drive IDs	. . . . . 4–15
Number of Ports in SANnet II 200 FC, SATA, and SATA SE Arrays	. . . . . 4–17
Number of Host Ports and Supported Host Port Speeds	. . . . . 4–19
Example Point-to-Point Configuration With Two Logical Drives in a Dual-Controller
Array	. . . . . . 5–9
Connection for Four Servers in a DAS Configuration	. . . . . 5–10
Example Primary and Secondary ID Numbers in a Loop Configuration With Two
IDs per Channel	. . . . . 5–13
Front-Panel LED Status When Array Is First Powered On	. . . . . . 6–1
Front-Panel LEDs	. . . . . . 6–3
Drive LED Status	. . . . . . 6–4
I/O Controller Module and Battery Module LEDs	. . . . . . 6–7
I/O Expansion Module LEDs	. . . . . . 6–9

xv