Dot Hill Systems II 200 FC service manual Downloading Firmware to Disk Drives in a, Jbod

4.Click OK.

The JBOD array is displayed in the main window.

In a single-bus configuration, both ports of the JBOD array are connected to one HBA on the server, as shown in the following example:.

In a split-bus configuration, each port is connected to its own HBA, as shown in the following example:

B.9 Downloading Firmware to Disk Drives in a

JBOD

For instructions on how to download firmware to disk drives in a JBOD directly attached to a host, refer to the README file in the patch that contains the firmware.

Appendix B Using a Standalone JBOD Array (SANnet II 200 FC Array Only) B-11