Dot Hill Systems II 200 FC service manual Preinstallation Worksheets

Note – SANnet II family arrays require at least CAT-5 Ethernet cable.

See the following preinstallation worksheet for additional preparation details.

2.8Preinstallation Worksheets

Before ordering an FC, SATA, or SATA SE array, complete the preinstallation worksheets on the following pages and then prepare the site for installation according to the site planning requirements.

Note – If you are connecting to several hosts or fabric switches, make as many copies of Table 2-5as you need and label them appropriately.

■You are responsible for ensuring that the site consistently conforms to all stipulated standards and that necessary peripherals are made available to the engineer during installation.

■Review the details of your specific survey before installing your array.

■If necessary, attach or sketch a network diagram to the survey.

2-6SANnet II 200 FC, SATA, and SATA SE Array Installation, Operation, and Service Manual • March 2005