Dot Hill Systems II 200 FC service manual

Note – A DB9-to-DB25 serial cable adapter is included in your package contents for connecting the serial cable to a DB25 serial port on your host if you do not have a DB9 serial port.

2.Power up the array.

3.On the server, choose Start →Programs →Accessories →Communications → HyperTerminal.

4.Type a name and choose an icon for the connection.

5.In the Connect To window, select the COM port from the Connect using: drop-down menu for that array.

6.Click OK.

7.In the Properties window, set the serial port parameters using the drop-down menus. Set serial port parameters to:

■38,400 baud

■8 data bits

F-2SANnet II 200 FC, SATA, and SATA SE Array Installation, Operation, and Service Manual • March 2005